At a glance
Vibration data sent over a 2.4 GHz RF link with about 90 days of battery life, so machine condition is always visible.
The wireless vibration transmitter combines vibration sensing, wireless transmission and status display. Data from the front-end sensor module is sent over the 2.4 GHz RF band and can be reviewed live on the HMI, keeping machine condition visible at all times.
Features
- 2 kbps data rate on the 2.4 GHz RF band
- Two long-life 18650 lithium cells for about 90 days of continuous operation, with explosion-proof potting
- Receiver with IPS colour LCD and endless rotary encoder
- Data format fully compatible with Sensor Fusion
Specifications
Receiver
- Display: 1.14” IPS colour LCD
- Controls: endless rotary encoder
- Main screen: vibration value / battery level / acceleration / velocity peak / RMS / axis / radio channel / data loss rate / sensor range / units
- Settings: range / TX-RX power / channel / ID / reception statistics
- Enclosure: 90 × 70 × 40 mm (excluding external antenna, approx. 11 cm, foldable)
- Power: supplied by Sensor Fusion
- Voltage output proportional to vibration (x / y / z / x+y / x+z / y+z / x+y+z)
- Data format fully compatible with Sensor Fusion
Transmitter
- 2.4 GHz RF band, 2 kbps (not Wi-Fi / Bluetooth / Zigbee)
- Two 18650 lithium cells, about 90 days of continuous operation (approx. 66 mAh per day)
- PCB size: 35 × 15 × 20 mm
- Battery pack: 40 × 70 × 25 mm (after explosion-proof potting)
- Custom mounting brackets available
